Jump to content

krish

BB Participant
  • Posts

    365
  • Joined

  • Last visited

Posts posted by krish

  1. I can do 1pm, but if the fishes are still sitting, it might be a problem.

    If you leave a container with me i can hold the sand in it for you.

    Try to see if someone will pass it on for you.

    -krish

    I am hands down not going to be able to make it at 5pm.  1pm maybe.  Before 10:30 certainly.  But that's about all the free time I have tomorrrow on my schedule.  I don't suppose there's any chance anyone else could pick up extra?  If not, I guess I'm goiing to have to duck out :(

    33078[/snapback]

  2. Count so far.

    Luke - 1

    Ne0eN - 2

    rocko918 - 2

    Tri Bui - 1

    Ghazanfar - 7 ( or what ever is left).

     

    I think that should clean up all the boxes i have left.

     

    Bob, thanks for working with Rob on your pickup as well.

    I will be out of town during the week and am available only

    during the weekends.

     

    Thanks folks

    -krish

  3. Ok so far we have 5 spoken for.

    Luke - 1

    Ne0eN - 2

    rocko918 - 2

    ----------------

    Bob,

    If you will be out of town this weekend, you can still swing by the next weekend

    and i can hold for you.

    You don't have to paypal, but must pick up or i will be stuck moving it as well.

    -krish

    -------------------------------

    Oh man, i didn't know you still had any left i would have picked some up from you. I am out of town this weekend. Is anyone going by this weekend that is will to pick m3 up 2?

     

    Krish- do you have paypal? I can pay you that way if someone can pick up 2 for me.

     

    Bob

    33076[/snapback]

  4. Folks,

    I have around 12 of these boxes that were not picked up

    by folks from the group order.

     

    You will have to pickup from my home in Herndon

    on Saturday or Sunday.

     

    Please post your dibs. Help me get this off before i post on

    Reef Central.

     

    The $35 is a great deal for a 200lb box.

     

    Thanks

    Krish

  5. Folks,

    The tank will need to be kept dry by saturday evening, since it might get

    picked up on Sunday early AM.

     

    Here is the tenative schedule for pickup.

     

    saturday

    --------

     

    Prefer all livestock pickup folks to come down around 11:00am so you can

    grab the stuff with less stress on the fish.

    Please bring your buckets.

     

    Craby(Luke) - 11:15 am

    Eddi - Salt pickup ( 12:00 - 1:00pm)

    stonecold -

    dbartco -

    dchild -

    tri bui -

     

    live Sand - emissary, Ne0eN,Ridley,armson( 5pm )

     

    Sunday

    -------

    Ousnakebyte(mike) - Pick tang on Sunday 2-3pm ( hold as an exception)

    scott711 - pickup seaswirl

     

    -Krish

  6. Hi Howard,

    I guess sunday afternoon or so will be fine or even evening after your are

    done with all your stuff.

    I will try to get rid off the livestock in the hex this and you can have the

    light and seaswirl.

     

    -krish

    Krish,

    When do you want me over to p/u the light and Sea Swirl?

    Howard

    33010[/snapback]

  7. Folks,

    The tank will need to be emptied and given to its possible new owner on

    Sunday AM.

    So the fish and sand will need to go on saturday.

     

    I have tabs on the PM for those that wanted the sand.

    If you have stuff that you have dibs on, but have not left your phone #, please

    PM me with the #.

    I will call saturday AM to schedule a pickup.

     

    It should be quick, since the rock will come out, the water will be drained and

    the fish caught.

     

    -krish

  8. Folks

    Here is what is remaining. Please PM me for if you are interested.

    This saturday/Sunday - June 11th/12th will be the fish pickup days.

     

    Tank/Stand/Canopy - $200 ( i have 2 folks wanting it.

    One has asked for picture. Picture sent.

    - Here is the scoop. A 120G from glass cages is darn heavy. The stand is a

    DIY made of 2x4 and 4x4. its darn heavy and built like a tank.

    You would need a minivan ( count 2 trips) or a large pickup ( for 1 trip).

    You will need at least 4 strong guys to haul it.

     

    If you can handle the above and get the tank out before JUNE 20, please

    commit. If not, then i don't wish to waste time, since the movers will be here

    after that date and i really want it gone by then.

     

    Hippotang (3-4", the pig of my tank)- $45 Hold for Ousnakebyte - Mike

    Yellowtang( very docile and about 3") -

    Anthias - $15 each ( have 3) hold for stonecold

    (anthias are 2 months since introduced to the

    tank and only eat frozen food)

    Mandarin - $15 ( eats only pods off the rocks)

    clowns - $40 ( large female, small male and

    they spawn regularly - false perc) Hold for dbartco

    Sebae anemone ( purple tip ) - $40

    (I would love to see the clowns go with the

    anemone and will offer it for $75) Hold for dbartco

    scooter dragnet - $9 hold for dchild

    pgymy angel - $18 hold for Tri Bui

    watchman goby ,small one - $10 hold for tri bui

    lemon peel angel - $15

    watchman goby, big one - $15

    royal gramma - $5 hold for dbartco ???? - Doug did you say you want it

    green chromis - $3 each ( there is at least 1 ).

     

    peppermint shrimp - $4 each( dont know how many are around)

     

    I also have a pistol shrimp ( he digs the sand and is green to brown in color.

    I was given as a pistol , but he could be a mantis. However, it is not as

    vibrant as a mantis. It however was a good pair with the small watchman goby.

    i could not stand their mess digging the sand out in my small tank. It

    will be a good pair if you have crushed coral instead of southdown) - FREE

     

     

    Mangrove seeds

    Mangrove seeds with 2 leaves( new sprout) - $4 each ( 6 available)

     

    -Krish

  9. Folks,

    Please see the other post for the 120G tank teardown sale as well.

     

    Here are the details on the 42Hex and the softies.

    I have updated with the Dibs. I apologize for the delay since i had to

    leave for NC on wednesday evening

     

     

    Hardware

    diy sea swirl (3/4") - $25 ( have tested

    pushing 700gph and works like a charm) - hold for scott711

    42G hex with stand (drilled)- $50

    ( some history of this tank. The glass broke when torqued and

    has new glass installed. I redrilled it and has an external durso overflow).

    The tank has been up and running for over 8 months.

     

    10G sump with external return pump - $20

    ( sump has a 1" bulkhead and fits well within the tank).

    The little giant return pump has got intermittent today. Using some lube

    lets it run for a while and a day later, it is stuck. Might be some clog along

    the shaft. It is pretty much a freebie.

     

    fish

    lemon peel angel - $15

    potters angel - $25

    Sorry, its not potters angel, but a pygmy angel

    scooter dragnet - $9 hold for dchild

    watchman goby - $10

    cleaner shrimp ( if still alive) - $17

     

    Corals

    Large sachrophyton leather 1ft in dia - $75

    rock with baby sacrophytons- $20 hold for ghazanfar

    frog spawn = $15 hold for keyoke

    pulsing xenia - $5

    brown leather - FREE

    neon green sinularia - $15 hold for craby

    orange ricordia that has just split - $20 for 2. hold for davidm

     

    Live Rock

    live rock about 50-70lbs @ $125 for the bunch.

    emissary wants to check it out and then buy it

     

    Lighting

    I am currenty using a CSL 48" long fixture

    that is currently just placed over the

    tank.

    The lamps are 2 65Wpc 10K and 2 65W actinics

    with the lamp assembly that has built in fans

    and moonlights.

    All the softies have been happy with this

    lighting and are growing well.

    The lights would go well with a 4ft long tank with softies.

    Looking to get $125 for the light. hold for howard

     

     

    Please respond. We can schedule folks to visit over the weekend

    to pickup stuff.

     

    Thanks

    Krish

  10. Folks,

    Thanks to all that have PMed me. I apologize for the delay in updating

    the items. I had to leave for NC wednesday evening and hence the delay

     

    I am relocating and have decided to tear down the 2 year old 120G reef tank.

    The tanks is a 4x2x2ft reef ready. It was custom built by glasscages.

    Comes with dual overflow chambers and 1.5" durso standpipes. It has glass

    bracing and no plastic center brace to melt. The tank is in good shape. Only

    one 1" long minor scratch on the inside and is not obvious. One would need

    at least 4 strong folks to lift the tank.

     

    I also have 300lbs of southdown sand in the tank that can be had for free.

    The sand bed has an eggcrate shelf, so no sand stirring and hence no deteritus

    mixup. The sand below the top layer is as good as new.

     

    The sump is a 29G tall and has a 1" bulkhead installed. I installed some baffles

    to suppress the mico-bubbles.

     

    The stand and canopy are DIY.

     

    The plan is to sell the Corals first, then the fish and followed by the hardware.

    I plan to setup a 360 or so in a couple of months when i am settled in NC, so will

    keep some of my hardware like the reactors/chiller/closed loop pump etc.

     

    Here are the details.

    Hardware

    120G Tank $150

    29G Sump $20

    stand $40

    canopy $15( furniture only)

    Package Deal of $200 - Reserved by Tri Bui

     

    If someone wants to purchase the lighting along with the canopy, we can discuss

    about it. I currently have 2 250W 10K MH and 2 110W VHO in the canopy along

    with 2 Radio shack fans.

     

    3/4" DIY sea swirl hold for howard

    3/4" DIY sea swirl hold for Mike

     

    Livestock

    PLATE

    Orange monticap plate large (over 3+ inches with multiple levels) - 35

    orange monticap plate small - 25 Gone

    purple monticap plate medium (hold for Kannan)

    purple rim plate - extra large (over 4-5 inches) - 60 Hold for fisface

    green plate with white tip - 30

     

    milliepora/Prostata

    Orange/red milli - $25 Gone

    green milli with white tip - $20 Gone

    Blue prostata/milli with peach tip ( big colony) - (hold for kannan)

    red milli - $20 hold for Mike

    purple prostata with dark blue tip frag - (hold for kannan)

     

    SPS combo rock

    Green/brown monti plate , orange plate and

    orange monti digitata all growing and fighting

    on the same rock along with GSP - $60 Hold for Craby

     

    Other Sps

    purple digitata - $10 hold for Chip

    light blue stag colony - $20 Gone (Chip - you already have this one)

    bali slimer - $15 hold for Chip

    blue formosa frag - $15 each ( 2 available) hold for Chip and wombat

    blue stag frag - $15 hold for Chip

    unknown sp acro with blue tip colony - $30 Gone

    unknown sp acro with purple/green/pink - (hold for kannan)

    acro valida - $20 hold for wombat

    pink pocillipora colony- $25 hold for Tom

    blue tip stag with brown body(fast grower) - $20

    acro valida large - $25 hold for fishface

    unknown acro colony, green polyp with pink tip - $40 Gone

    tricolor - large - $15 hold for dchild

    tricolor - small - $10 hold for wombat

    pink stag with blue tip ( 2 branches) - $20 hold for wombat

    bali cultured acro ( neon green and large

    sized, healthy and growing well. Might be A.Jacklinea ) - $80

    green hydnophora - $30 hold for fishface

    brown montipora colonies - free

    california blue tort - 1/2" frag - $20 hold for Mike

     

    clams

    dark Blue maxima - 30 hold for reelsteel

    light blue maxima - 30 hold for reelsteel

    Deresa clam - 25 hold for stonecold

    feather duster - $10

     

    softies

    green Sinularia - $15 hold for Tom

    green yuma ricordia, the tips are

    purple in color- $50( has a number of polyps

    that it has dropped off). hold for craby

    small toad stool - $5 hold for keyoke

    Pulzing xenia colonies - $5

    buttons, gsp... - goes with the rock @ $2.50/lb ( not selling all Live rock, but only

    those that have softies stuck to it)

     

    fish ( all have been disease free)

    Hippotang (3-4", the pig of my tank)- $45

    Yellowtang( very docile and about 3") - $20 hold for craby

    Anthias - $15 each ( have 3) hold for stonecold

    (anthias are 2 months since introduced to the

    tank and only eat frozen food)

    Mandarin - $15 ( eats only pods off the rocks)

    clowns - $40 ( large female, small male and

    they spawn regularly - false perc)

    Sebae anemone ( purple tip ) - $40

    (I would love to see the clowns go with the

    anemone and will offer it for $75)

     

     

    watchman goby, big one - $20

    royal gramma - $15

    green chromis - $3 each

     

    peppermint shrimp - $4 each( dont know how many are around)

    hold for craby, tom,

     

    Mangrove seeds

    Mangrove seeds with 2 leaves( new sprout) - $6 each ( 7 available)

    hold 1 for Craby

     

    Please PM me with interest. I have pics and can email them. They are high

    resolution. Pickups will be this weekend and next weekend.

     

    I will update with dibs as folks PM me.

     

    Please also check out the 42G hex tank breakdown. Some of the softies

    that you wanted might come from that as well.

     

    Thanks

    Krish

  11. someones munching em.

    My entire colony of zoos are almost gone.

    The Hippo had a snack in the 120.

    Moved em to the 42G softies tank to save.

    The bi-color angel started the nip. Took em out.

    The bi-color taught the lemon peel to nip, who was

    a good citizen until the bad one was introduced.

     

    So in all, its the munching fish , at least in my case. :huh:

    -krish

  12. It is a better idea to go with a hole that would support 1.5" bulkhead. A 1"

    plumbing for the drain can only handle a 500gph pump. When i tried to use

    a 700gph pump, it was too powerful to the point where the tank would overflow.

     

    You should just go with a single hole . The glass is not strong enough for 2 holes

    on a single pane.

     

    I have a 1" drain, with an external durso fitting. The external durso was per Michael's suggestion. Has been working great.

     

    -krish

  13. Eddi,

    Knowing the way the canopy on the 125 is fixed, i would go with the

    multiple layers of screen.

     

    One of my XM10K got cracked. Just caught it in time before it exploded.

    This was the one that came from Hello Lights. Anyway, after i just

    swapped it out with a new one, a week later, my tenius is not happy.

     

    The very same tenius that has done well under 6500K sakis and then

    the 10K XM is kind of withdrawn. Hope it survives. I have moved it to

    a spot where the intensity is less.

     

    Nevertheless, i read an article that all it takes is 30 minutes for

    photo inhibition to occur. Keeping the lights off for 45 minutes did not

    help recover.

    So the best protection is to go with one week of swap out at a

    time for each new lamp and in addition, the area lit by the lamp

    should go thru the 3 or 4 layer eggcrate shield. A small insurance to

    avoid a meltdown.

     

    -krish

  14. I found the pH drop to 10.4. There was a ton of residue left in the

    reactor. I emptied it out , cleaned it and added new kalk. The ph is

    good now. The tank is also stable. This is something i should have done

    sooner and not after letting the hair algae make a comeback. When the

    pH was high enough, the hair algae were all turning white and

    disappearing. I think the reactor is precipitating phosphate quite well.

     

    So i plan on doing the clean up and reloading once every month or 45

    days depending on the effluent pH.

     

    -krish

  15. David,

    I have 2 irons. One is the heavy duty gun and the other is the very low

    watt one for handling SMD stuff. I normally use the gun on the PCB.

    I can bring it with me. I have the wire cutter as well.

     

    Solder/rosin flux, multimeter. what else we need?

     

    -krish

  16. Folks,

    I apologize that i havn't been keeping up with all the posts. I just checked

    the thread to see if we are gonna make it for Sunday. It appears not. I am

    available for next weekend. We can still make a few units if everyone is not

    going to be around.

     

    Doug, you can drop off the stuff at my place. No issues.

     

    Vegas, wow. Will be a good blast. Have fun.

     

    -krish

  17. Howard,

    The chinese gent sounds fine, given that he has sold to umpteen folks on ebay.

     

    On the modus operandii, the 2 float switches are connected back-to-back ( in series).

    If the lower one gets stuck and keeps the circuit closed, water will flow in until

    the one higher touches water and disconnects the circuit.

     

    -krish

  18. Howard et all,

    Good job.

    Kudos that you are all able to find the time for getting this going.

     

    Here is my count.

    If the chinese order works fine, i will take 4 float switches.

     

    Regarding the PCB & Kit, i will go with 2 units.

    I can cover for Kannan who needs 2 float switches and 1 PCB + kit.

    Luke is out of town. I know the guy is running

    his pump on the float switch direct 110V. :-)

     

    Will reconfirm again. But he does want the float switches per my last

    conversation with him.

     

    -krish

×
×
  • Create New...