-
Posts
701 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Posts posted by jstlsn
-
-
Where can I get my CO2 Tank refilled? I have been getting it refilled at Bars by Bud in Fairfax, but it is a hike from both work and home. Anything in Woodbridge or Herndon areas?
Thanks
Brad
-
Thanks again for the help. I have been trying to figure this out for months now and was just too lazy to ask.
Brad
-
-
How do I add pictures from my gallery to a thread? There was a button for adding pictures from my gallery. You click it and it popped up a window. All you had to do was click the picture you wanted and the URL was added to the thread. When the forum was upgraded that button went away. Any help would be greatly appreciated.
Thanks
Brad
-
I would recommend pointing a power head directly at the RBTA. After sometime (usually a few hours) it will start moving. You can tell it is on the move when the base is all puffed up with water. At that point it is very easy to peel off the rock.
Brad
-
This first part defines the names you give to each outlet on your DC8
LT1$-A4
LT2$-A2
LT3$-A3
This part turns the lights on and off based on the time on the ACIII
If Time > 14:00 Then LT3 ON
If Time > 23:59 Then LT3 OFF
If Time > 13:00 Then LT2 ON
If Time > 23:00 Then LT2 OFF
If Time > 15:00 Then LT1 ON
If Time > 21:59 Then LT1 OFF
Brad
-
Actually I replaced all the tubing last month so I could get black instead of clear. I am fairly good at cleaning everything on the tank.
No one else has any advice? 50 views and one helper...
Where did you find the replacement black tubing? I have not been able to find black tubing to replace the clear 3/8 OD feed line.
Thanks
Brad
-
I had the same problem with mine after a few years. I determined that the inside of the black tube that runs from the reactor back to the tank had build on the inside. My feed tube was also full of build up. The build up would cause the drip to stop. Once the drip stopped and the CO2 cut on it would build up in the reator and cause bubbles. I would suggest cleaning or replacing all of your tubing.
Also, I never reuse media when I clean it out. I dump the left over and start with fresh.
Brad
-
I believe the Blue Ribbon Koi phone number is 703-753-7566.
I have also ordered from www.reefgeek.com.
www.bulkreefsupply.com also sells bulbs and if you get in on a group buy you can save a few bucks.
Brad
-
Are there any positives or negative to adding water from my display to my Quarantine Tank?
Thanks
Brad
-
Thanks for the advice. The biggest problem I have is that it is attached to a rock that I can not take out of the tank. So a dremel and band saw will not work.
Thanks
Brad
-
I have a chalice I would like to frag. I have tried to use a pair of clippers and a scalpel but they both seem to just rip up the flesh on the coral. Any help would be greatly appreciated.
Thanks
Brad
-
Looks like everyone uses the same thing I already have. Any tips for keeping the Ammonia, Nitrites, Nitrates down?
-
Getting ready to set up my QT tank again.
What kind of filtration are people using on their QTs?
Thanks
Brad
-
I did it once. Got my results via email. Had a small problem with the email blocking their email. I would recommend trying it. I might get it done again.
Brad
A few months ago I stumble upon this website http://www.aquariumwatertesting.comThey offer lab quality tests for aquarium water. It seems pricey but you definitely get accurate results, and they test for 14 parameters.
With the price of some of the better test kits it might even be a good deal.
I was wondering if anyone has tried their service.
I was thinking about doing the $109.99 Reference Kit "You get 4 Sample Submission Packs each of which can be submitted at any time to receive our 14 parameter analysis."
That will give me a complete test every 3 months for a year and will also allow me to compare their results to my test kits to measure accuracy.
Any thoughts?
-
Chip
Very nice. You work fast. Can't wait to check it out in person.
Brad
-
Thanks Brian. Is it the Nepture Systems Lab Grade Probe? The answer I got on Reef Central was
"Yep, all you will see is a platium wire, no covering on it. Its OK."
Thanks
Brad
Mine has the little glass bulb. Just like the pH probe. -
What should the tip of the Neptune Systems Lab Grade ORP Probe look like? I was expecting it to look like the pH Probe with a little glass bulb at the end. However it has a little silver wire. I just want to make sure it isn't broken.
Thanks
Brad
-
I use them and I like them. You can order them straight from the company instead of ebay.
http://www.oceanswonders.com/catalog/item/...791/5520864.htm
Brad
It would appear that super glue is the choice.... thanks. Has anyone used these NEODYMIUM N50 MAG RACK .. I saw it on ebay and looked at there store.. Looks clean, but wondered if anyone has used one.. -
Best $20 a year I have spent on this hobby.
Brad
-
Chip
I got mine from you back on March 2nd, 2008. It is still alive and happy. :-) So, is my clown that likes to swim around in it.
Thanks
Brad
-
The first baby I found alive would only eat live baby brine. It was born back on 10/23/2007. However with the second baby I found alive, it would eat the Ocean Nutrition Instant Baby Brine Shrimp.
OK, link is not working. Go to Marine Depot and search for Ocean Nutrition Instant Baby Brine Shrimp.
It was much easier than hatching my own. It was born on 05/31/08. Both now eat all types of frozen food and are living in my refugium.
Good Luck.
Thanks
Brad
-
I need to order a new Calcium Test Kit and a new Magnesium Test Kit? I currently have Salifert Test Kits. Any recommendations for new tests kits that are more acurate?
Thanks
Brad
-
Jon
Thanks for the help. I have tried RO/DI and it is 1.000 ( 0 ppt). I have also tested the calibration fluid about 25 times and my tank water about 25. And I have cleaned the prism glass and plastic cover between each. When I adjust the refractometer for the calibration fluid to read 1.026 (approx. 35 ppt), my tank water is testing at 1.031. That seems extremely high to me. However, everything in my tank seems happy. The fish are swimming around and eating. Coral all have their polyps out. RBTA looks happy. That is why I am wondering if the calibration fluid is off. I would think that 1.031 would have an adverse affect on my inhabitants.
tbittner, I have also tried floating the calibration fluid in the tank. The reading was slightly different than before I floated it. But still doesn't explain the differences.
Thanks
Brad
Brad,
I'm assuming you've tried multiple times and keep getting the same results? Have you doublechecked with a second benchmark, like RO/DI water with a salinity of 0 ppt?
I've gotten incorrect readings with my refractometer through poor lab practices like not cleaning the equipment properly after a reading. This resulted in remnants from the first sample skewing the result of the second. Make sure you clean the prism glass and both sides of the plastic coverplate. If you wait a long time while taking a reading, the water may begin to evaporate from under the coverplate causing salinity to rise.
Jon
HELP!!! ATO Tubing Split
in General Discussion
I have a Spectrapure UPLC II ATO and the tubing inside the pump split. So, I need a LiterMeter III Tubing Replacement Kit. I believe it is this one:
http://spectrapure.com/LiterMeter-III-Tubing-Replacement-Kit-Gen5-Gen6
Does anyone happen to have an extra one I can buy? I am going to try and get one overnighted from SpectraPure in the morning, but I thought I would check WAMAS also.
Thanks
Brad