marylynn7 January 22, 2017 Share January 22, 2017 (edited) Hello, I am a beginner and I just purchased an Aquamaxx 22 gallon long tank. I would like to install a glass-holes overflow box on the left-hand side and a Lily pipe for the right side. I am adding a sump tank below. I can't find any examples of a Lily pipe attached to flexible tubing and a sump pump (only canisters). I also considered the MAME overflow but it looks complicated. Does anyone make larger glass J pipes that would work with a sump pump? I would really appreciate your ideas and feedback. Thank you. Mary Lynn Edited January 22, 2017 by marylynn7 Link to comment Share on other sites More sharing options...
20LogR January 24, 2017 Share January 24, 2017 There's no reason it wouldn't work if you're lily pipe supported the GPH flow you were looking for. I'm assuming you're looking at glass lily pipes? Long term your biggest issue is going to be coralline algae growing in the inside it. Otherwise you can use something like this: http://www.bulkreefsupply.com/return-jet.html Good Luck Link to comment Share on other sites More sharing options...
sethsolomon January 24, 2017 Share January 24, 2017 Is there a specific reason you want to use glass? I am with 20Logr clear piping in a reef will just get algaed up with coraline and other algaes. I would either drill the hole for the return line or do the return jet like 20logr posted. Link to comment Share on other sites More sharing options...
marylynn7 February 3, 2017 Author Share February 3, 2017 Hello Sethsolomon and 20LogR, Thank you for responding to my question. I would like to be able to move the return line around the edge of the aquarium since I may change its orientation. I actually considered buying spare parts of a MAME overflow for the glass elbow. Unfortunately, the owner of Saltwater Conversion is not taking orders (due to health issues). I may try the CPR return for now. http://www.bulkreefsupply.com/inflow-kit-by-cpr.html Thanks again for the reply. Mary Lynn Link to comment Share on other sites More sharing options...
sethsolomon February 3, 2017 Share February 3, 2017 Hello Sethsolomon and 20LogR, Thank you for responding to my question. I would like to be able to move the return line around the edge of the aquarium since I may change its orientation. I actually considered buying spare parts of a MAME overflow for the glass elbow. Unfortunately, the owner of Saltwater Conversion is not taking orders (due to health issues). I may try the CPR return for now. http://www.bulkreefsupply.com/inflow-kit-by-cpr.html Thanks again for the reply. Mary Lynn If your going with the clear tube, you might as well go with the glass. As clear plastic is worst on growing stuff in the tubes. Sent from my Nexus 6 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now