Jump to content
AlanM

Interested in Apex/RK controlled d120's?

229 posts / 32865 viewsLast Reply

Recommended Posts

Yes. The methodology is the same. There are Files in the chinese blackbox led proof group on facebook that document the hack. Mike Herman has posted videos of modifying SB boxes and Troy Long sells prefabbed kits to add the control port.

Share this post


Link to post
Share on other sites

Yep, Lee is right.  The newer ones use PWM drivers rather than the 10V Analog ones.  The PWM ones can go pretty low on dimming and are simpler to do from RA.

Share this post


Link to post
Share on other sites

Hmm, mine are only a few weeks old and seem to be analog (that is what my relay box is sending them and they're dimming what I believe to be properly). I made my own cables and wired them up. Mine only go down to roughly 10%. 

Edited by madweazl

Share this post


Link to post
Share on other sites

That's accurate. Only certain models use pwm like the wifi i believe. But the basics are analog and some of the drivers now can take either signal.

Share this post


Link to post
Share on other sites

That's accurate. Only certain models use pwm like the wifi i believe. But the basics are analog and some of the drivers now can take either signal.

I never bothered to check if they would accept a PWM signal; just went with what I had read here and over on the RA boards. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...