Jump to content

nextlevel808

BB Participant
  • Posts

    267
  • Joined

  • Last visited

Everything posted by nextlevel808

  1. Yes tank I’m treating is actually my main tank. I removed all corals and inverts a few months back when dosed cupramine for first time. Tank is 240g with 125g sump 300g of water. Test kit I’ve been using is Seachem. Reason I’m treating in main tank is because I don’t have a big enough qt tank for all my fish as I have 4 bigger tangs alone and 10 fish total. At this point I don’t care if I can hold corals in the tank again as more worried about my fish as have few higher end or harder to find fish. I have a small coral tank if need for that. As far as carbon or other media filters I have removed all carbon and cuprisorb I was running from treatment few months ago as need to treat again. Skimmer and uv are both off. Only thing I have besides powerhead and heater running is an air pump to help with depleted O2 and filter socks.
  2. I could really use some advice. Ok I tested copper 3-4 days ago and it was at .2ppm since then I added 20mls (1ml per 10g) twice. I've been adding an extra 10ml each time for rock and sand. So technically I should be at around .4ppm now as I've done 4 doses of 20ml. But today when I tested I'm still at .2ppm . Now would my air pump be precipitating the copper out or would rock and sand be absorbing it all? I don't understand where that last 40mls went. That's also probably why the ich is still present on fish and reason it's still in my system. I bet it never reached a treatment zone level of .35-.5ppm the first time I treated my big tank a few months ago. I added another 25mls today and I'll probably test again this afternoon when I wake up. What are other people’s thoughts on where that last 40mls went?
  3. Can I please meet up with you on Saturday morning? I will even pay you for the issue.
  4. I really want the whole thing so I’ll probably end up ordering a copy off reef2rainforest. I’ve called every book store and lfs within a hour of me and no one carries it.
  5. I want it for the micro reef section in it. Maritza’s pico jar reef is in it.
  6. Does anyone have a copy of this months Coral magazine I could buy or know somewhere I can get this months. I have tried all book stores in the area and no one carries it. Please help me out as it’s on a topic I’m looking to venture into. Thanks.
  7. Come on really with all the experts on here no one is willing to help try and save a fish? This is pretty much the exact reason I let my paid membership run out because unless your a select few no one is willing to help out. Sorry I figured since this is a local reefing and saltwater forum I would get some help. Sorry to post my frustration but in the end I'm only trying to save the fish as I don't have a qt tank setup or if did wouldn't know where or how to start. I don't know enough about parasites or diseases to know what I'm dealing with.
  8. I have a 6" foxface I've had for 2.5 years. I added a new fish about 2 months ago from a recommended dealer that says they qt the fish before sells. Since then my foxface I have not personally seen my foxface eat which it use to devour food. It has to be eating because it's lasted the last 2 months. It seems to show signs of maybe ich or white spots. Also now has scratched up nose and mouth area and really at times almost seems blind. I really have no clue what is going on with it but looking for someone with a setup QT tank as I don't have one. I would be will to give fish away if someone would take the time and try and treat and make fish happy again. Please message me if your interested. Thanks in advance and sorry I will not mention the dealer though.
  9. I used 3/4" wide 1/2" thick weather stripping
  10. Haha so true that was his advice when he did my plumbing for new build.
  11. Can't wait to see what you end up with and the corals you place. Your 75 looks great.
  12. You should be good if you don't over stock it or over feed. Not sure about space but look into an algae turf scrubber instead they will export a lot and heard people not needing skimmer as much.
  13. Better find out how bad leak is first. Only good thing is all the copper piping should be in chiller so not like finding leak in your house. Whether or not you can access the spot where the pipe is would be another thing. And like mentioned above would have to find what refrigerant and oil the manufacture uses. Then depending on which one could be costly.
  14. its called the Flipper but think the tunze is better. Ive heard a lot of mixed reviews for the flipper.
  15. Ive been using the algae free magnet cleaner for a while but saw this few weeks ago and wanted to try it out. Might make getting closer to sand easier but not sure if I would still just use razor blade by hand by sand bed or not even with the tunze saying it would catch as much sand.
  16. I've tried Joes juice and aiptasia X and with both products they seem to go away for a week or so then come back. I even tried a copperband which ate them all then started eating lrs frozen food and now won't touch aiptasia anymore and they grow back once they stop eating them. I also have a Niger trigger so peppermint shrimp are out. I have heard stories of if you don't get whole thing with laser they will just spread.
  17. Looks awesome and I like that the weir is removable to clean if need to
  18. That's a great idea with the buying tanks just for glass. As I paid a lot for my baffles with smooth edges. Now given it was 3/8" thick but wasn't cheap.
  19. On my old system I just upgraded to this I was dosing brs 2 part, vodka and vinegar, this one I'm not sure yet as there is no coral but I might do 2 part plus few extra trace elements but I'll figure that out down the road and once I start test them all.
  20. Here is a few pictures from my new build. New just need to get my second eb8 working and figure out how to dial in my skimmer so I can use both pumps. I want to say thank you to a few members that have helped me in my build so a thank you to Ron W., Alan M., and Rob. Hope you all enjoy the build as its been a 4 month process and my old tank crashed in meantime so I now get to restart with all new coral. http://s1042.photobucket.com/user/Joseph_Quick/profile/
×
×
  • Create New...