sydney

I just purchased a wet side. I will try it later

Well i didnt take them off the tank

My mp40s are flashing red and green and are not pumping. I tried to hard reset them. Nothing happens. Has anyone had this happen to them before

Does anyone know where I can get a 1 inch diamond bit from

II seen 1 inch. Not 3/4

I'm looking to buy some 3/4 flex pvc pipe. Where can I get it from

a few pics of the stand and canopy that im building

Not sure about pump yet. I have a few laying around. Yeah its a nice hex tank I got rid of a 70 cube for it

I'm in the process of setting up a 85 hex reef tank . I'm gathering equipment now and building the stand and canopy. I already drilled that tank. 2 one inch drains and 4 3/4 holes for a Close loop. I will be making a sump prob out of a 20 or 30 long aquarium. Not sure if I want led or MH lights . I will be getting a controller prob a apex. I have Calcium reactor and kalk reactor. hopefully I can fine some of the stuff I need used . I ATO and light .I will be posting pics as I go

I think I'm going to go with the apex. It would be nice if I can find one used tho

The apex runs around 500 bucks right.

I'm about to purchase a Neptune controller but I don't no which one to get. I will be using a cal reactor,pumps , lights , and kalk reactor with ATO. I no bigger is better. But if I can get away with using the JR or lite I can save some $$$

16 buck.

Well tank wasn't tempered. Came out good. And did yall no lowes sell 3/4 diamond bits with a guide bit in the middle